MiraGard NanoGlass Admixture
MiraGard NanoGlass Admixture is a clear, single component, water-based, fortified colloidal silicate that densifies new pool and spa plaster finishes. Based on superior inorganic mineral technology, it will significantly extend the service life of pool plaster and minimize the potential for the most common problems associated with pools such as etching, dusting, discoloration, cracking, and calcium nodules.cementitious materials such as concrete, mortars and masonry.
Advantages:
- Converts Ca(OH)2 (soluble) into CSH (insoluble)
- Cures, seals, and densifies new plaster
- Increases Compressive value of plaster
- 50% reduction in plaster moisture absorption
- Reduces plaster dusting >80%.
- Water thin micro-crystalline technology – penetrates fast.
- Faster and easier balanced start up
- Reduces color loss and potential for etching and calcium nodules
- Minimizes the potential for shrinkage and micro-cracking.
Where to use:
- New pool and spa plaster finishes
- Marcite and polished plaster
- Exposed white or colored quartz finishes
- Exposed white or colored pebble finishes
- Smooth troweled colored plaster
- Smooth troweled colored quartz finish
- Smooth troweled white plaster and unexposed quartz finish.
Create a custom PDF for your submittal package. Select from the following documents: Product Technical Data Sheets (PTDS), Installation Guides, Safety Data Sheets, Color Charts, CSI Specs, Detail Drawings, Warranty Info., Care & Maintenance, and Chemical Resistance Charts.
WHY IT WORKS:
The interaction between pool plaster and pool water is ongoing. Ensuring a consistent pH and total alkalinity within a safe range is widely recognized as crucial for safeguarding not only your pool plaster but also various components of your swimming pool. Similarly, it's common knowledge that when water chemistry goes awry, your pool plaster may incur damage or exhibit undesirable behavior. By significantly reducing the calcium hydroxide and effectively filling the voids and capillaries with NanoGlass, the application significantly reduces chemical interactions between the plaster and pool water.
WHERE IT WORKS:
NEW POOL FINISHES
It engages with and fortifies the fresh plaster, swiftly and enduringly diminishing the chemical reactions between the water and the cement material within the interior finish. The bothersome
"dusting" commonly associated with new plaster finishes is nearly eradicated.
Contact Miracote
Have a question, need a sample, looking for a contractor? Send us a message or give us a call.
(800) 692-3502
