Conference Halls

[insert page=’enterprise-solutions’ display=’content’]

 

Conference Halls

The hardscapes in conference halls need to be built-to-last because it experiences so much traffic, and serves the public in so many ways. Public restrooms, kitchens and food courts have special maintenance needs and cleanliness requirements. Forklifts and utility vehicles traverse the premises to support tradeshows, creating issues with ramps, walkways and decorative and polished concrete floors. Parking decks and sidewalks need to be maintained. Concrete is used virtually everywhere. There is even a science behind building a concrete planter because of issues related to water.

Rely on Miracote for solutions that restore, resurface, protect, and extend the life of parking decks, driveways, sidewalks and other concrete features. We have specially engineered products for virtually any hardscape challenge you can find in a conference hall, or for virtually any other type of construction project.

Whether you are building a convention center from the ground up, or looking for ways to repair, refurbish and protect your hardscape assets, Miracote has the products, expertise and resources you need.

  • Product/Solutions:

  • Before and after

  • Protects against penetration of water, chlorides and carbonation

  • No oder – VOC and LEED compliant

  • Reduced life cycle costs – prolongs service life of parking decks

  • Lower labor and material costs

  • Moisture vapor permeable

Miracote MPC Park Deck

Miracote MPC Park Deck is a polymerized, two-component, cementitious protective and waterproof coating that is applied to concrete parking deck surfaces in three coats to a typical minimum thickness of 3/32" or approximately 94 mils. It consists of a unique rubber-like polymer liquid which is mixed with a proprietary cement and aggregate blend. Miracote MPC Park Deck is most typically applied by notched squeegee and back-rolled, but can also be easily applied by hand trowels, magic trowels, brush or spray.

Designed for either exterior or interior use, Miracote MPC Park Deck restores and protects concrete surfaces from the consequences of exposure to water intrusion, chlorides, freeze thaw damage, carbonation and the impact and abrasion of vehicular traffic. Miracote MPC Park Deck is an extremely durable, cost-effective protective coating that is "breathable" and allows for the transmission of inherent moisture vapor within concrete without blistering or delamination. This inherent benefit of Miracote MPC Park Deck also helps lower internal moisture content of the concrete substrate which can further lead to significant reduction in corrosion rates of steel reinforcement.

Miracote MPC Park Deck is available in two aggregate blends depending on the volume and severity of traffic conditions. Miracote MPC Regular Powder is ideal for normal conditions in parking stalls, drive lanes and turn lanes. Miracote MPC Hard Powder is modified with the addition of aluminum oxide aggregate for enhanced abrasion resistance where more extreme duty is required, such as in turn lanes and entrance and exit ramps.

For detailing and treatment of existing cracks, MiraFlex Membrane A is an elastomeric rubber emulsion that is required to use for crack isolation. For enhanced cleanability and stain resistance, consult with Crossfield Products for appropriate clear acrylic, polyurethane or siloxane-based surface sealers.

Advantages:

  • Moisture vapor permeable – reduces potential for corrosion
  • Protects against penetration of water, chlorides and carbonation
  • Ideal for exterior/interior, pedestrian and vehicular traffic
  • Excellent adhesion to damp concrete substrates
  • Lower labor and material costs
  • Reduced life cycle costs – prolongs service life of parking decks
  • One product for all three coats
  • No broadcasting or recovery excess sand
  • Less sensitivity in adverse weather conditions
  • No odor – VOC and LEED compliant

Technical Info:

 

Mirathane AR (Auto-Ramp) System

Mirathane AR (Auto-Ramp) systems are designed to provide technical and economic solutions for most vehicular decks. It is a cold liquid applied, elastomeric urethane traffic deck membrane and integral urethane skid resistant traffic topping. Finished film thickness of the systems will vary depending upon intended end use and environmental service conditions.

Mirathane AR systems are designed for use under direct exposure to light to heavy vehicular traffic. It is an attractive, tough and durable system designed to protect the concrete deck surfaces from the deleterious effects of water and waterborne chloride penetration. The systems consist of a primer providing a continuous bond to the concrete substrate, an elastomeric urethane membrane and tough protective traffic urethane topping with encapsulated aggregate for skid resistance.

-Mirathane AR systems provide effective economical solutions for most usage conditions.
-Mirathane AR for light to medium vehicular traffic (parking stalls and low turn over facilities).
-Mirathane AR for heavy vehicular traffic (drive lanes and ramps).

Advantages:

  • Low odor
  • Good weatherability
  • Uniform concrete gray color
  • Custom colors available (minimum order 300 gallons)

Technical Info: Please refer to Product Technical Data Sheet

 

MPC Parking Deck Coating System

MPC Parking Deck Coating is a polymerized, two-component, cementitious protective and waterproof coating that is applied to concrete parking deck surfaces in three coats to a typical minimum thickness of 3/32" or approximately 94 mils. It consists of a unique rubber-like polymer liquid which is mixed with a proprietary cement and aggregate blend. MPC Parking Deck Coating is most typically applied by notched squeegee and back-rolled, but can also be easily applied by hand trowels, magic trowels, brush or spray.

Designed for either exterior or interior use, MPC Parking Deck Coating restores and protects concrete surfaces from the consequences of exposure to water intrusion, chlorides, freeze thaw damage, carbonation and the impact and abrasion of vehicular traffic. MPC Parking Deck Coating is an extremely durable, cost-effective protective coating that is "breathable" and allows for the transmission of inherent moisture vapor within concrete without blistering or delamination. This inherent benefit of MPC Parking Deck Coating also helps lower internal moisture content of the concrete substrate which can further lead to significant reduction in corrosion rates of steel reinforcement.

MPC Parking Deck Coating is available in two aggregate blends depending on the volume and severity of traffic conditions. MPC Regular Powder is ideal for normal conditions in parking stalls, drive lanes and turn lanes. MPC Hard Powder is modified with the addition of aluminum oxide aggregate for enhanced abrasion resistance where more extreme duty is required, such as in turn lanes and entrance and exit ramps.

For detailing and treatment of existing cracks, Miracote Membrane A is an elastomeric rubber emulsion that is required to use for crack isolation. For enhanced cleanability and stain resistance, consult with Crossfield Products for appropriate clear acrylic, polyurethane or siloxane-based surface sealers.

Where to Use
• Concrete Restoration and Protection projects
• Waterproofing protection on new and existing parking decks
• Horizontal surfaces, columns, walls and ceilings
• Restoration and protection for stadiums and sports arenas
• Waterproofing and protection of balconies and breezeways
• Driveway and sidewalk resurfacing

Advantages:

  • Moisture vapor permeable – reduces potential for corrosion
  • Protects against penetration of water, chlorides and carbonation
  • Ideal for exterior/interior, pedestrian and vehicular traffic
  • Excellent adhesion to damp concrete substrates
  • Lower labor and material costs
  • Reduced life cycle costs – prolongs service life of parking decks
  • One product for all three coats
  • No broadcasting or recovery excess sand
  • Less sensitivity in adverse weather conditions
  • No odor – VOC and LEED compliant

Technical Info:

 

 

MiraPatch DP

Miracote MiraPatch DP is a thin-section, rapid-hardening composition that is flexible, resilient and easy to clean. MiraPatch DP produces an extremely durable, low cost, yet attractive appearance. MiraPatch DP can be installed over concrete when pre-smoothing or pitch is required. Typical thickness up to 1 1/2 of an inch (38 mm) are easy to achieve. MiraPatch DP is light in weight and at approximately 1.2 lbs. per square foot. It can be used in the widest ranges of climates and is offered in slip-resistant profiles. MiraPatch DP is supplied as a light gray powder.
Important characteristics of MiraPatch DP are its extraordinary adhesion coupled with its ability to withstand prolonged pedestrian and vehicular traffic. In these respects the material is far superior to conventional cementitious coatings used to resurface old or worn concrete.
MiraPatch DP provides a tough retardant coating, which substantially reduces or prevents water penetration, freeze thaw, scaling and concrete carbonation.

Where to Use
• Concrete restoration
• Sidewalk restoration
• Parking lot restoration

Advantages:

  • Rapid setting
  • Rapid hardening
  • Faster cure speed in cold weather versus standard repair mortars. Cures rapidly, as low as 45°F.
  • Just need water. Redyuces mixing errors.
  • Reduced storage space
  • Freeze-thaw stable
  • Can be pulled to a feather edge
  • Thickness above 1-1/2" can be achieved by incorporation of pea gravel.
  • Can be applied to vertical and overhead surfaces.

Technical Info:

  • MSDS
  • PTDS – Temporarily unavailable
  • IG – Temporarily unavailable

 

MiraPatch RM 1

Miracote MiraPatch RM 1 is a polymer-modified two-component smoothing and resurfacing compound for concrete floors and decks. Applied to any thickness from 3" to featheredge with superior adhesion to prepared substrates. MiraPatch RM 1 has very high compression strength and it can be left exposed to industrial-type traffic or covered with almost any type of floor covering – carpet, resilient tile, even the very hard troweled resin floor systems.

Compared to conventional concrete toppings, MiraPatch RM 1 has greatly improved adhesion, greater abrasion resistance, less shrinkage, greater resistance to water and salt penetration, and better tensile strength.

MiraPatch RM 1 is Zero-VOC, virtually odorless, and environmentally safe. It requires no special training for installation and is easily handled by a handyman mason. It sets rapidly, can be applied over damp (not wet) surfaces, and can be installed at temperatures as low as 50F (10C).

Where to Use
Use MiraPatch RM 1 for interior or exterior structural repair applications on spalled, deteriorated or scaling concrete decks and industrial floors. MiraPatch RM 1 is specially designed to prepare concrete for Miracote polymeric floor finishes.

Advantages:

  • High-Build: can be applied from featheredge to 3" thickness.
  • Non-Shrinking: no cracks or fissures, same co-efficient of expansion as concrete.
  • Freeze-Thaw Resistant: water retardancy prevents cold weather scaling.
  • Simple to use: pre-portioned mixing.
  • Polymer-Fortified: self-curing and superior adhesion.
  • High Compressive Strength.

Technical Info:

 

 

Miracote MPC (Multipurpose Protective Coating)

Miracote MPC (Multipurpose Protective Coating) is a polymerized, two component, cementitious protective coating that can be applied over a variety of surfaces including concrete, masonry, metal, wood and tile. It consists of a unique rubber-like polymer liquid that is mixed with a proprietary cement and aggregate blend.  Miracote MPC is then applied in two or more coats by trowel, brush, roller, spray or squeegee to a typical thickness of 1/16" (16mm). Designed for both exterior and interior use, Miracote MPC restores and protects concrete surfaces from the consequences of exposure to water and chloride intrusion, freeze thaw damage and carbonation.  Miracote MPC is an extremely durable, cost-effective protective coating that is "breathable" and allows for the transmission of inherent moisture vapor within concrete without blistering or delamination. By lowering moisture content within the concrete, Miracote MPC helps reduce the potential for corrosion of steel reinforcement.

Where to Use
Concrete Restoration and Protection projects – Resurfacing new concrete slabs that are flawed or discolored – Parking decks, columns, walls and ceilings – Bridge Parapets and Abutments – Renovations to Stadiums and Arenas – Resurfacing of balconies and breezeways – Driveway and sidewalk resurfacing – Pool decks and patios – Building entrances and stairs – Concrete and masonry water tank linings – Decorative floor finishes and microtoppings.

Advantages:

  • Moisture vapor permeable – reduces potential for corrosion
  • Protects against penetration of water, chlorides and CO2
  • Ideal for exterior/interior, pedestrian and vehicular traffic
  • Enhances appearance and curb appeal of concrete & masonry
  • Excellent adhesion to most substrates
  • Extensive choice of colors, textures and patterns

Technical Info: